Baoding Jindi Machinery Co.,Ltd

Product Photos
Features
Related Photos
Help
Notes

　　　　　　JBG-40 K rebar rib stripping and rolling parallel thread lathe

　　It was developed by our company in December 2005 and is only produced in this factory. It not only adjusts freely in the range φ 14—40 mm using the rib-stripping plate but also eliminates the problem that the rebar head with screw thread often becomes bigger, further guaranteeing the construction quality.

　　　　　　　Features

It can process rebars of HRB 335 and HRB 400 with dia from 14 mm to 40 mm.

It has the unique self opeing die head. The rebar is clamped only once and the rebar head with screw thread can be processed within 30 seconds.

The processing of the parallel thread adopts sold rolling technology . The rebar head has no false thread. The thread size is precise.

The process does not destroy the bottom diameter of the base material. The splicing strength is stronger than that of the parent material

Reasonable design. There is only one handpiece left and right-handed thread , which is quite easy to operate and maintain. The cutting tool can be replaced for only 3-5 minutes.

Technical data

Technical data	Technical Data
Weight	450 kg
Dia of rebar	φ 14—φ 40 mm
Voltage	380 V 50 HZ
Rotate speed	40-62 r／min
Motor Potor	4 kw
Length of thread	80 mm

　　Operation

1.Peparation

　　Put enough water-solubility colling fluid into the tank for coolant ( oily colling fluid is forbidden).

2.Test the machine

　　Start the power and check whether the cooling system and the electronic system work normally .

3.Change the rollers according to the diameters of the rebar

　　Roller and the rebar

Roller	1﹟	2﹟	3﹟
Dia of bar (mm)	16-22	25-32	36-40
Thread pitch	2.5	3.0	3.5

4.Change the lead bush

　　Thickness of the lead bush

Thread pitch	2.5			3.0			3.5
Thickness of bush (mm)	5.17	6.00	6.83	5.00	6.00	7.00	4.83	6.00	7.17

5.Using the matching test stick to adjust the distance between the rollers to match the rebars.

6.Fix the matching positioning disc according to the bars you will process.

7.Adjusting the stripping length through the adjusting of the knife-raising block.

　　The length of stripping length of rebar

Specification of rebar	φ 16	φ 18	Φ 20	Φ 22	Φ 25	Φ 28	Φ 32	Φ 36	Φ 40
Length of	22.5	25	27.5	30	32.5	35	37.5	42.5	45

8.djust the travel switch according to the specification of the bar to guarantee the length of effective thread of rebars.

　　The effictive length of thread for rebars

Specification of rebar	φ 16	φ 18	Φ 20	Φ 22	Φ 25	Φ 28	Φ 32	Φ 36	Φ 40
Length of	22.5	25	27.5	30	32.5	35	37.5	42.5	45

　　　　　Notes

1.	Cooling fluid must be water-solubility .The oily cooling fluid and oil are strictly forbidden.
2.	You can not make thread on rebars when there is no cooling fluid.
3.	The end of the rebars should be even and smooth and should be cut by saw . Gas cutting , cutting machine are not allowed to use . There should not be bend or U-shape in the end of rebars (within the length of 500 mm in the end) .
4.	When peeling the rib at the beginning , do not use great strength to feed in.
5.	Slide block and slide way should be cleared and lubricated regularly.
6.	Iron fillings in the defrosting pan should be cleared regularly .
7.	The coolant should be cleared every 15 days.
8.	The reducer shuold be feed oil regularly.
9.	The machine should be maintained regularly.